Steel Tracks

Steel Tracks are resistant to distortion due to road surface conditions such as a hard, rail surface is also smooth, It is suitable to be taken a more high-quality video.
On the other hand, heavy weight compared to aluminum rails, unsuitable point will be listed in the loading and transportation. Please choose according to the application.


Spec.
STANDARD Tracsk / Width 62cm
Form ID Length Weight
Straigth Tracks 155/4 120 cm 10 kg
155/6 180 cm 15 kg
155/8 240 cm 17 kg
155/10 300 cm 20 kg
Carve Tracks 45° 153 240 cm 17 kg
Full Circle = 520 cm (45° x 8)
Wide Tracks / Width 81cm
Form ID Length Weight
Staight Tracks 155/4WB 120 cm 11.5 kg
155/6WB 180 cm 17.5 kg
155/8WB 240 cm 20 kg
155/10WB 300 cm 24 kg

*Crane use, straight Track only

Alminum Tracks

Of aluminum Track feature is its lightness.
Parts of sleepers called the cross bar, and consolidated the best Track only fit into the groove.
Some because the material is soft compared to steel Track, there is that the distortion of the rail occurs when carrying the heavy. Therefore, whether or not there is a small step or the like is when you install the Tracks, it is recommended that you check the road conditions.


Spec.
STANDARD Tracsk / Width 62cm
Form ID Length Weigh
Staight Tracks 151/ALU 150 cm 4 kg
Carve Tracks 30° 152/ALU 150 cm 4 kg
Full Circle = 540 cm (30° x 12)

Camera Leveller

Camera leveler is the equipment to keep the camera horizontally.
Mount is compatible with 100mm / 150mm ball and Mitchell 3 Way.
It can be attached to such as a focus dolly and Universal Dolly.
In addition, by combining it with the camera riser, you can height adjustment.


Spec.
Camera Leveller
Mount : 100mm bowl 150mm bowl Mitchel 3 way
Height : 22.5cm 25.0cm 20.0cm
Weight : 2.6kg 3.3kg 5.5kg

Camera Riser

And camera leveler, will be used to adjust the height of the corresponding equipment.
It can be attached to such as a focus dolly and Universal Dolly.
Different camera riser heights have been four types available, 10cm / 20cm / 30cm / 40cm and height has become in increments of 10cm, you can have more than one connected with use.


Spec.
Accessories
Height : 10cm / 20cm / 30cm / 40cm
Weight : 3 - 4kg

Seat Support

Egripment supplies a variety of seat supports. All seat supports fit on all Egripment dollies, cranes and platforms. Seat supports are available for two people (cameraman and assistant) on which the camera turns on the centre pivot point, and seat supports for TV cameras with one chair where the camera can be placed so as to turn on the centre pivot point or in front of the centre and in line with the cameraman as he pivots. The seat and camera positions of all seat supports can be easily adjusted in height and length by easy to use accessories.


Seat Riser 30cm Seat Riser 15cm Seat Riser Pin

Call Us

Please contact the receptionist below for any questions.

Sanwa Cine Equipment Rental Co., Ltd. ProSHOP Dept.

Sanwa Cine Equipment Rental Co., Ltd. 5-5 Kojimachi, Chiyoda-ku, Tokyo 102-0083, Japan

+81-3-5210-3322

Access

E-mail Inquiry Form
Inquiry

The content may change without notice.

go top